SN65176BDR

Overview of SN65176BDR

SN65176BDR is a Bus Line Transceiver optimized for bidirectional transmission, low-voltage operations, and thermal shutdown protection. It provides excellent performance for data transmission in noisy environments.

Pinout

The SN65176BDR pinout refers to the configuration and function of each pin in its SOIC-8 package. This package typically includes a diagram showing the layout of the pins when viewed from the top down with pins named sequentially. Each pin on the SN65176BDR has a specific role such as power supply input, ground connection, or signal interface. The pinout details are crucial for integrating this component into a circuit as they ensure correct connections for optimal device performance. Designers and engineers must refer to the datasheet provided by the manufacturer to get accurate information regarding each pin's function and electrical characteristics.

Features

• Bidirectional transceivers: Meet or exceed the requirements of ANSI standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27, designed for multipoint transmission on long bus lines in noisy environments.
• 3-State driver and receiver outputs
• Individual driver and receiver enables
• Wide positive and negative input/output bus voltage ranges
• ± 60-mA Maximum driver output capability
• Thermal shutdown protection
• Driver positive and negative current limiting
• 12-kΩ Minimum Receiver Input Impedance
• ± 200-mV Receiver input sensitivity
• 50-mV Typical receiver input hysteresis
• Operate from single 5-V supply

Applications

• Data transmission: This component is suitable for data transmission in industrial settings, process control systems, and automation applications.
• Sensor and actuator communication for automation and process control
• Error detection and correction:

Advantages and Disadvantages

Advantages

• Broad bus voltage range: The SN65176BDR operates within a wide positive and negative input/output bus voltage range, making it suitable for various industrial environments.
• High reliability: This component ensures high reliability through thermal shutdown protection and driver positive and negative current limiting.
• Easy integration: The SN65176BDR's SOIC-8 package makes it easy to integrate into existing systems.
• Fault tolerance: The receiver's input impedance is designed to provide fault tolerance for noisy or malfunctioning transmission lines.

Disadvantages

• Component cost: The SN65176BDR may be more expensive than other alternatives due to its advanced features and high-reliability design.

Equivalents

For similar functionalities, consider these alternatives to the SN65176BDR:

• TIA/EIA-422-B compliant transceiver
• ISO 8482-compliant serializer/deserializer
• Differential signaling Bus Transceiver:

Frequently Asked Questions

Q: What is the operating temperature range of the SN65176BDR?
A: The recommended operating temperature range is from -40°C to 105°C.

Q: Can the SN65176BDR be used in high-speed transmission applications?
A: Yes, the component can operate at speeds up to 10 Mbps.

Q: How does the SN65176BDR handle noise and interference on the bus line?
A: The receiver has a minimum input impedance of 12 kΩ, which provides fault tolerance for noisy or malfunctioning transmission lines.

Q: Is the SN65176BDR compatible with other industrial communication protocols?
A: Yes, the component meets or exceeds the requirements of ANSI standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27.

Q: What is the recommended storage temperature for the SN65176BDR?
A: The recommended storage temperature range is from -30°C to 80°C.