MSPM0L1306SDGS28R

The MSPM0L134x and MSPM0L130x microcontrollers from TI's MSPM0 MCU family are designed for high performance and ultra-low power operation. With an Arm Cortex-M0+ core platform running at up to 32 MHz, these MCUs offer a cost-effective solution for a wide range of applications. The devices feature up to 64 KB of embedded flash program memory and 4 KB of SRAM, alongside a variety of high-performance analog peripherals. These include a 12-bit 1.68 MSPS ADC, a high-speed comparator, operational amplifiers, and a general-purpose amplifier, among others

Key Features

• Core
  • Arm 32-bit Cortex-M0+ CPU, frequency up to 32 MHz
• Operating characteristics
  • Extended temperature: –40°C to 125°C
  • Wide supply voltage range: 1.62 V to 3.6 V
• Memories
  • Up to 64KB of flash
  • Up to 4KB of SRAM
• High-performance analog peripherals
  • One 12-bit 1.68-Msps analog-to-digital converter (ADC) with up to 10 total external channels
  • Configurable 1.4-V or 2.5-V internal ADC voltage reference (VREF)
  • Two zero-drift, zero-crossover chopper operational amplifiers (OPA)
    • 0.5-µV/°C drift with chopping
    • 6-pA input bias current ⁽¹⁾
    • Integrated programmable gain stage (1-32x)
  • One general-purpose amplifier (GPAMP)
  • One high-speed comparator (COMP) with 8-bit reference DAC
    • 32-ns propagation delay
    • Low power mode down to <1-µA
  • Programmable analog connections between ADC, OPAs, COMP, and DAC
  • Integrated temperature sensor
• Optimized low-power modes
  • RUN: 71 µA/MHz (CoreMark)
  • STOP: 151 µA at 4 MHz and 44 µA at 32 kHz
  • STANDBY: 1.0 µA with 32-kHz 16-bit timer running, SRAM/registers fully retained, and 32MHz clock wakeup in 3.2µs
  • SHUTDOWN: 61 nA with IO wakeup capability
• Intelligent digital peripherals
  • 3-channel DMA controller
  • 3-channel event fabric signaling system
  • Four 16-bit general-purpose timers, each with two capture/compare registers supporting low-power operation in STANDBY mode, supporting a total of 8 PWM channels
  • Windowed watchdog timer
• Enhanced communication interfaces
  • Two UART interfaces; one supports LIN, IrDA, DALI, Smart Card, Manchester and both support low-power operation in STANDBY
  • Two I 2C interfaces; one supports FM+ (1 Mbit/s) and both support SMBus, PMBus, and wakeup from STOP
  • One SPI supports up to 16 Mbit/s
• Clock system
  • Internal 4- to 32-MHz oscillator with ±1.2% accuracy (SYSOSC)
  • Internal 32-kHz low-frequency oscillator with ±3% accuracy (LFOSC)
• Data integrity
  • Cyclic redundancy checker (CRC-16 or CRC-32)
• Flexible I/O features
  • Up to 28 GPIOs
  • Two 5-V-tolerant open-drain IOs with fail-safe protection
• Development support
  • 2-pin serial wire debug (SWD)
• Package options
  • 32-pin VQFN (RHB)
  • 28-pin VSSOP (DGS)
  • 24-pin VQFN (RGE)
  • 20-pin VSSOP (DGS)
  • 16-pin SOT (DYY) , WQFN (RTR)⁽²⁾
• Family members (also see Device Comparison)
  • MSPM0L13x3: 8KB of flash, 2KB of RAM
  • MSPM0L13x4: 16KB of flash, 2KB of RAM
  • MSPM0L13x5: 32KB of flash, 4KB of RAM
  • MSPM0L13x6: 64KB of flash, 4KB of RAM
• Development kits and software (also see Tools and Software)
  • LP-MSPM0L1306 LaunchPad™ development kit
  • MSP Software Development Kit (SDK)

⁽¹⁾MSPM0L134x only

⁽²⁾The 16-pin WQFN package is product preview.