M27C801-100F1

The M27C801-100F1 is a 8-Mbit (1Mb x 8) UV EPROM IC with a 100ns access time.This EPROM offers non-volatile data storage capabilities and is commonly used for program storage in various electronic systems.

Pinout

(Note:The pin configuration below is a general representation.Refer to the specific datasheet for precise details.)

• A16-A0: Address Inputs
• DQ0-DQ7: Data Input/Output
• G: Output Enable

Circuit Diagram

Include a circuit diagram illustrating the connections and operation of the M27C801-100F1 EPROM for a visual representation.

Key Features

• 8-Mbit UV EPROM:The M27C801-100F1 offers 8 megabits of non-volatile storage capacity for program storage applications.
• 100ns Access Time:With a fast access time of 100ns,this EPROM provides quick data retrieval for efficient system operation.
• Wide Operating Voltage Range:Operates within a specified voltage range,making it compatible with various electronic systems.
• Programmable:Allows for programming of data into the EPROM for customization and flexibility in stored information.
• Durable Construction:Built with UV erasable technology for reliable and long-lasting data retention.

Note:For detailed technical specifications,please refer to the M27C801-100F1 datasheet.

Application

• Program Storage:Suitable for program storage in microcontrollers,embedded systems,and other electronic devices requiring non-volatile memory.
• Firmware Development:Used in firmware development for storing program instructions and data.
• Data Logging:Applies to data logging applications where non-volatile storage is necessary for record-keeping.

Functionality

The M27C801-100F1 is a UV EPROM that provides reliable non-volatile data storage capabilities for program code and data.It is commonly utilized in systems requiring persistent program memory.

Usage Guide

• Power Supply:Connect VCC(Pin 28)to the positive power supply and GND(Pin 1)to ground.
• Data I/O:Connect the data input/output pins (DQ0-DQ7) to the system for reading and writing data.
• Programming:Use the necessary control pins(!CE,!OE,!PGM,!W,etc.)to program data into the EPROM.

Frequently Asked Questions

Q:Can the M27C801-100F1 be reprogrammed multiple times?
A:The M27C801-100F1 is a UV EPROM and requires UV erasure for reprogramming,which limits the number of reprogrammable cycles compared to EEPROM or flash memory.

Q:What is the typical data retention period for the M27C801-100F1?
A:The M27C801-100F1 can typically retain data for up to 20 years under normal operating conditions.