5KP60A

Transient Voltage Suppression DiodesAxial Leaded – 5000W> 5KP seriesDescriptionThe 5KP Series is designed specifcally to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.Features• 5000W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%• Glass passivated chip junction in P600 package• Fast response time: typically less than 1.0ps from 0 Volts to BV min• Excellent clamping capability• Typical failure mode is short from over-specifed voltage or current• Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c• IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact)• ESD protection of data lines in accordance with IEC 61000-4-2• EFT protection of data lines in accordance with IEC 61000-4-4• Low incremental surge resistance• Typical IR less than 2μA when VBR min>12V• High temperature to reflow soldering guaranteed: 260°C/40sec / 0.375”, (9.5mm) lead length, 5 lbs., (2.3kg) tension• VBR @ TJ= [email protected]°C x (1+αT x (T J - 25)) (αT:Temperature Coeffcient, typical value is 0.1%)• Plastic package is flammability rated V-0 per Underwriters Laboratories• Matte tin lead–free plated• Halogen free and RoHS compliant• Pb-free E3 means 2nd level interconnect is Pb-free and the terminal fnish material is tin(Sn) (IPC/JEDEC J-STD- Applications TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications.

Key Features

• 5000W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%
• Glass passivated chip junction in P600 package
• Fast response time: typically less than 1.0ps from 0 Volts to BV min
• Excellent clamping capability
• Typical failure mode is short from over-specifed voltage or current
• Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
• IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact)
• ESD protection of data lines in accordance with IEC 61000-4-2
• EFT protection of data lines in accordance with IEC 61000-4-4
• Low incremental surge resistance
• Typical IR less than 2μA when VBR min>12V
• High temperature to reflow soldering guaranteed:
• 260°C/40sec / 0.375”, (9.5mm) lead length, 5 lbs., (2.3kg) tension
• VBR @ TJ=
• [email protected]°C
• x (1+αT x (T J - 25))
• (αT:Temperature Coeffcient, typical value is 0.1%)
• Plastic package is flammability rated V-0 per Underwriters Laboratories
• Matte tin lead–free plated
• Halogen free and RoHS compliant
• Pb-free E3 means 2nd level interconnect is
• Pb-free and the terminal fnish material is tin(Sn) (IPC/JEDEC J-STD-