MTFC8GAKAJCN-4M IT eMMC Datasheet, Pinout, Specs & Application
Prof. David Reynolds
Published:April 30, 2024
eMMC(Embedded MultiMediaCard) is a type of embedded storage commonly used in portable electronic devices such as smartphones, tablets, and digital cameras. It integrates both flash memory and a flash memory controller into a single package, making it a cost-effective and space-saving storage solution. The MTFC8GAKAJCN-4M eMMC plays a crucial role in the IT and electronics industry due to its reliability, performance, and versatility. It is widely used in smartphones, tablets, digital cameras, and other portable devices where compact, high-speed storage is essential. In addition, it is also used in automotive, industrial, and networking applications, highlighting its importance in various sectors of the electronics industry. In this article, we will explore the MTFC8GAKAJCN-4M IT specifications, pin configuration, applications, datasheet, and more details about this eMMC.
Overview of MTFC8GAKAJCN-4M IT
The MTFC8GAKAJCN-4M IT is a 64-gigabit (8-gigabyte) Embedded MultiMedia Card (eMMC) 5.0 flash memory module from Micron Technology Inc. It features 153 pins, operates in parallel, and comes in a VFBGA package. The card is RoHS 10 compliant and has a VCC voltage range of 2.7V to 3.6V and a VCCQ voltage range of 1.65V to 1.95V. It is a high-performance eMMC (Embedded MultiMediaCard) storage solution designed for use in various electronic devices. It features a compact form factor and integrates both flash memory and a flash memory controller in a single package, making it an efficient and cost-effective storage solution.
MTFC8GAKAJCN-4M IT eMMC Features
- MultiMediaCard (MMC) controller and NAND Flash
- 153-ball FBGA package (RoHS compliant, "green package")
- VCC: 2.7–3.6V
- VCCQ (dual voltage): 1.7–1.95V; 2.7–3.6V
- Industrial temperature ranges
- Operating temperature: –40˚C to +85˚C
- Storage temperature: –40˚C to +85˚C
MMC-Specific Features:
- JEDEC/MMC standard version 5.0-compliant (JEDEC Standard No. JESD84-B50)
- Advanced 12-signal interface
- x1, x4, and x8 I/Os, selectable by host
- SDR/DDR modes up to 52 MHz clock speed
- HS200/HS400 modes
- Real-time clock
- Command classes: Class 0 (basic); class 2 (block read); class 4 (block write); class 5 (erase); class 6 (write protection); class 7 (lock card)
- Temporary write protection
- Boot operation (high-speed boot)
- Sleep mode
- Replay-protected memory block (RPMB)
- Secure erase and secure trim
- Hardware reset signal
- Multiple partitions with enhanced attribute
- Permanent and power-on write protection
- High-priority interrupt (HPI)
- Background operation
- Reliable write
- Discard and sanitize
- Extended partitioning
- Context ID
- Data TAG
- Packed commands
- Dynamic device capacity
- Backward compatible with previous MMC
- Cache
- Field firmware update (FFU)
- Device Health Report
- Sleep notification
- Power-off notification
- ECC and block management implemented
MTFC8GAKAJCN-4M IT Specifications
| Type | Parameter |
| Technology | FLASH - NAND |
| Memory Size | 8 GB |
| Configuration | MLC |
| Sequential Read | 190 MB/s |
| Sequential Write | 22 MB/s |
| Supply Voltage | 2.7V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Memory Type | Non-Volatile |
| Package / Case | 153-VFBGA |
MTFC8GAKAJCN-4M IT Pinout
MTFC8GAKAJCN-4M IT CAD Model
MTFC8GAKAJCN-4M IT Symbol
MTFC8GAKAJCN-4M IT Footprint
MTFC8GAKAJCN-4M IT 3D Model
MTFC8GAKAJCN-4M IT Block Diagram
Advantages of MTFC8GAKAJCN-4M IT
1. High Storage Capacity in a Compact Form Factor
The MTFC8GAKAJCN-4M IT offers a storage capacity of 8GB in a small and compact form factor. This allows for the storage of large amounts of data in devices with limited space, such as smartphones, tablets, and portable media players.
2. Fast Read and Write Speeds for Efficient Data Transfer
With its high-speed interface, the MTFC8GAKAJCN-4M IT provides fast read and write speeds, enabling efficient data transfer between the NAND flash memory and the host device. This is especially beneficial for applications that require quick access to data, such as gaming consoles and digital cameras.
3. Low Power Consumption for Energy-Efficient Operation
The MTFC8GAKAJCN-4M IT is designed to consume low power, making it ideal for use in battery-powered devices. Its energy-efficient operation helps extend the battery life of devices, ensuring they can operate for longer periods without needing to be recharged.
4. Durability and Reliability for Long-Term Use
NAND flash memory is known for its durability and reliability, and the MTFC8GAKAJCN-4M IT is no exception. It is designed to withstand the rigors of daily use, including temperature fluctuations, shock, and vibration, ensuring reliable performance over the long term.
MTFC8GAKAJCN-4M IT Application
Embedded Systems and IoT Devices
The MTFC8GAKAJCN-4M IT is suitable for use in embedded systems and IoT devices due to its compact size, high storage capacity, and low power consumption. It can be used to store firmware, configuration data, and other essential files in devices such as smart home devices, industrial sensors, and wearable technology.
Consumer Electronics such as Smartphones and Tablets
The MTFC8GAKAJCN-4M IT can store operating systems, applications, multimedia files, and user data on smartphones and tablets. Its high-speed interface and efficient data transfer rates make it ideal for use in devices that require fast and reliable storage.
Automotive Infotainment Systems
Automotive infotainment systems require high-capacity, reliable storage for storing maps, audio files, and other multimedia content. The MTFC8GAKAJCN-4M IT can be used in these systems to provide fast and efficient storage, enhancing the user experience.
Industrial Automation and Control Systems
Industrial automation and control systems often require high-speed, reliable storage for storing critical data and firmware. The MTFC8GAKAJCN-4M IT can be used in these systems to provide the necessary storage capacity and performance for smooth and efficient operation.
MTFC8GAKAJCN-4M IT Package
MTFC8GAKAJCN-4M IT Manufacturer
Micron Technology, Inc. is a global leader in the semiconductor industry, specializing in memory and storage solutions. With a broad portfolio of DRAM, NAND flash memory, and SSDs, Micron serves a wide range of industries, including consumer electronics, automotive, and data centers. The company is known for its innovation, quality, and commitment to sustainability. Micron's memory and storage solutions are integral to powering the world's most advanced technologies, from smartphones and laptops to cloud computing and artificial intelligence. With a focus on advancing technology and improving lives, Micron continues to push the boundaries of what is possible in the semiconductor industry.
MTFC8GAKAJCN-4M IT Datasheet
Download MTFC8GAKAJCN-4M IT Datasheet PDF.
Conclusion
In conclusion, the MTFC8GAKAJCN-4M IT eMMC is a highly important and versatile storage solution in the IT and electronics industry. Its compact form factor, high performance, and reliability make it a preferred choice for a wide range of electronic devices, including smartphones, tablets, and industrial equipment.
The MTFC8GAKAJCN-4M's role in the IT and electronics industry is significant. It provides efficient and cost-effective storage solutions for manufacturers and users alike. Its integration into various electronic devices has helped drive innovation and advancement in the industry, enabling the development of smaller, more powerful, and more efficient devices.
Read More
FAQ
-
What is the Storage Capacity of MTFC8GAKAJCN-4M IT?
8 gigabytes (GB).
-
Can MTFC8GAKAJCN-4M IT be Used in Gaming Consoles?
Yes, MTFC8GAKAJCN-4M IT can be used in gaming consoles to store game data, firmware, and other system files. Its high-speed operation and compact size make it suitable for use in various gaming consoles.
-
How does MTFC8GAKAJCN-4M IT compare to other NAND flash memory in terms of speed?
MTFC8GAKAJCN-4M IT offers high-speed data transfer rates comparable to those of other NAND flash memory modules in its class. This allows for fast read and write operations, improving overall system performance.
-
How Does MTFC8GAKAJCN-4M IT Compare to Traditional Hard Disk Drives (HDDs)?
MTFC8GAKAJCN-4M IT NAND flash memory offers several advantages over traditional hard disk drives (HDDs), including faster read and write speeds, lower power consumption, smaller form factor, and higher durability due to the absence of moving parts. However, HDDs typically offer higher storage capacities and are often more cost-effective for large-scale storage solutions.
Still, need help? Contact Us: [email protected]