W25Q32JVTCIQ

FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 133 MHz 24-TFBGA (8x6)

Key Features

• New Family of SpiFlash Memories
• – W25Q32JV: 32M-bit / 4M-byte
• – Standard SPI: CLK, /CS, DI, DO
• – Dual SPI: CLK, /CS, IO0, IO1
• – Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3
• – Software & Hardware Reset(1)
• Highest Performance Serial Flash
• – 133MHz Single, Dual/Quad SPI clocks
• – 266/532MHz equivalent Dual/Quad SPI
• – 66MB/S continuous data transfer rate
• – Min. 100K Program-Erase cycles per sector
• – More than 20-year data retention
• Efficient “Continuous Read”
• – Continuous Read with 8/16/32/64-Byte Wrap
• – As few as 8 clocks to address memory
• – Allows true XIP (execute in place) operation
• – Outperforms X16 Parallel Flash
• Low Power, Wide Temperature Range
• – Single 2.7V to 3.6V supply
• – <1µA Power-down (typ.)
• – -40°C to +85°C operating range
• Flexible Architecture with 4KB sectors
• – Uniform Sector/Block Erase (4K/32K/64K-Byte)
• – Program 1 to 256 byte per programmable page
• – Erase/Program Suspend & Resume
• Advanced Security Features
• – Software and Hardware Write-Protect
• – Special OTP protection(2)
• – Top/Bottom, Complement array protection
• – Individual Block/Sector array protection
• – 64-Bit Unique ID for each device
• – Discoverable Parameters (SFDP) Register
• – 3X256-Bytes Security Registers
• – Volatile & Non-volatile Status Register Bits
• Space Efficient Packaging
• – 8-pin SOIC/VSOP 208-mil
• – 8-pad WSON 6x5-mm, XSON 4x4-mm
• – 16-pin SOIC 300-mil
• – 8-pin PDIP 300-mil
• – 24-ball TFBGA 8x6-mm (6x4 ball array)
• – 24-ball TFBGA 8x6-mm (6x4/5x5 ball array)
• – Contact Winbond for KGD and other options