W25M512JVBIQ

FLASH - NOR Memory IC 512Mbit SPI 104 MHz 24-TFBGA (6x8)

Key Features

• New Family of SpiFlash Memories
• – W25M02GV: 2x1G-bit / 2x128M-byte
• – Standard SPI: CLK, /CS, DI, DO, /WP, /Hold
• – Dual SPI: CLK, /CS, IO0, IO1, /WP, /Hold
• – Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3
• – Compatible SPI serial flash commands
• Highest Performance Serial NAND Flash
• – 104MHz Standard/Dual/Quad SPI clocks
• – 208/416MHz equivalent Dual/Quad SPI
• – 50MB/S continuous data transfer rate
• – Fast Program/Erase performance
• – More than 100,000 erase/program cycles
• – More than 10-year data retention
• Efficient “Continuous Read Mode”(1)
• – Alternative method to the Buffer Read Mode
• – No need to issue “Page Data Read” between
• Read commands
• – Allows direct read access to the entire array
• Flexible “Concurrent Operations”
• – Independent single die access
• – Allows “Read while Program/Erase”
• – Allows “Multi Die Program/Erase”
• – Improves Program/Erase throughput
• Low Power, Wide Temperature Range
• – Single 2.7 to 3.6V supply
• – 25mA active, 20µA standby current
• – -40°C to +85°C operating range
• Flexible Architecture with 128KB blocks
• – Uniform 128K-Byte Block Erase
• – Flexible page data load methods
• Advanced Features
• – On chip 1-Bit ECC for memory array
• – ECC status bits indicate ECC results
• – bad block management and LUT(2) access
• – Software and Hardware Write-Protect
• – Power Supply Lock-Down and OTP protection
• – 2KB Unique ID and 2KB parameter pages
• – Ten 2KB OTP pages(3)
• Space Efficient Packaging
• – 8-pad WSON 8x6-mm
• – 24-ball TFBGA 8x6-mm
• – Contact Winbond for other package options