LTC1152 (6)
The LTC1152 is available from Analog Devices at Xecor. Designed for high-performance, low-power zero-drift operational amplification, the LTC1152 offers rail-to-rail input and output capabilities, minimal input offset voltage, and low power consumption. Available in 8-pin SOIC packages, it is ideal for high-resolution data acquisition systems, precision instrumentation, and low-supply-voltage transducer amplifiers. Whether used in automotive sensing, industrial control systems, or telecommunications, this series ensures exceptional accuracy, stability, and efficiency for demanding applications. Xecor is an authorized distributor for Analog Devices. Please view our extensive selection of the LTC1152 series below.
| Part Number | Description | Package | Inventory | Add To Bom |
|---|---|---|---|---|
| LTC1152IS8#PBF | Precision op amp with zero-drift performance | SOIC-8 | 7,854 | |
| LTC1152CS8#PBF | This product, LTC1152CS8#PBF, is a single-function operational amplifier known for its low offset voltage and compatibility with CMOS technology | SOIC-8 | 4,900 | |
| LTC1152CN8#PBF | Low-noise, high-gain amplifier with adjustable gain and offset, ideal for audio and medical equipment applications | PDIP-8 | 2,124 | |
| LTC1152CS8#TRPBF | Enhance your signal processing capabilities with this ultra-low noise, low-voltage, zero-drift operational amplifier | SOIC-8 | 4,731 | |
| LTC1152IN8#PBF | Get precise signal processing with this 700KHz RRO opamp in 8DIP | PDIP-8 | 7,011 | |
| LTC1152IS8#TRPBF | Suitable for a wide range of precision applications | SOIC-8 | 7,797 |
Key Featrues
Rail-to-Rail Input and Output: The LTC1152CS8#PBF features rail-to-rail input and output capabilities, allowing it to handle signals that span the entire supply voltage range. This enhances its versatility in low-voltage applications and ensures maximum signal integrity, making it ideal for precision measurement and data acquisition systems.
Zero-Drift Operation: With its zero-drift architecture, the amplifier minimizes input offset voltage and drift over time and temperature. This results in highly accurate signal amplification, particularly beneficial in high-resolution instrumentation and sensor interfaces where long-term stability is critical.
Wide Supply Voltage Range (2.7V to 14V): The device operates across a broad supply voltage range, enabling its use in both low-power and higher-voltage systems. This flexibility supports diverse applications, from battery-powered devices to industrial control systems.
High CMRR and PSRR (115dB and 110dB): The LTC1152CS8#PBF offers exceptional common-mode rejection ratio (CMRR) and power supply rejection ratio (PSRR), reducing noise and interference from external sources. This ensures clean signal amplification in noisy environments, enhancing performance in precision analog circuits.
Capacitive Load Driving Capability: The amplifier is designed to drive any capacitive load without oscillation, eliminating the need for external compensation components. This simplifies circuit design and improves reliability in applications such as filter circuits or capacitive sensor interfaces.
Zero-Drift Operation: With its zero-drift architecture, the amplifier minimizes input offset voltage and drift over time and temperature. This results in highly accurate signal amplification, particularly beneficial in high-resolution instrumentation and sensor interfaces where long-term stability is critical.
Wide Supply Voltage Range (2.7V to 14V): The device operates across a broad supply voltage range, enabling its use in both low-power and higher-voltage systems. This flexibility supports diverse applications, from battery-powered devices to industrial control systems.
High CMRR and PSRR (115dB and 110dB): The LTC1152CS8#PBF offers exceptional common-mode rejection ratio (CMRR) and power supply rejection ratio (PSRR), reducing noise and interference from external sources. This ensures clean signal amplification in noisy environments, enhancing performance in precision analog circuits.
Capacitive Load Driving Capability: The amplifier is designed to drive any capacitive load without oscillation, eliminating the need for external compensation components. This simplifies circuit design and improves reliability in applications such as filter circuits or capacitive sensor interfaces.
Applications
High Resolution Data Acquisition Systems: The LTC1152 is perfect for high-resolution data acquisition systems, where its rail-to-rail input and output capabilities ensure accurate signal processing across the full voltage range. Its zero-drift architecture minimizes offset and drift errors, making it ideal for applications requiring precise measurements in industrial and scientific environments.
Supply Current Sensing in Either Rail: The LTC1152 excels in supply current sensing applications, where its ability to operate with rail-to-rail inputs and outputs allows for accurate current monitoring in both positive and negative supply rails. This makes it suitable for power management systems and battery monitoring in portable devices.
Low Supply Voltage Transducer Amplifiers: The LTC1152 is well-suited for amplifying signals from low-voltage transducers, such as pressure or temperature sensors. Its ability to operate from a supply voltage as low as 2.7V and its rail-to-rail performance ensure accurate amplification of small signals in energy-efficient designs, such as wearable devices or IoT sensors.
High Accuracy Instrumentation: The LTC1152 is ideal for high-accuracy instrumentation applications, such as precision multimeters or laboratory equipment. Its zero-drift technology and rail-to-rail operation ensure minimal error and maximum signal fidelity, making it a reliable choice for applications demanding the highest levels of precision and stability.
Supply Current Sensing in Either Rail: The LTC1152 excels in supply current sensing applications, where its ability to operate with rail-to-rail inputs and outputs allows for accurate current monitoring in both positive and negative supply rails. This makes it suitable for power management systems and battery monitoring in portable devices.
Low Supply Voltage Transducer Amplifiers: The LTC1152 is well-suited for amplifying signals from low-voltage transducers, such as pressure or temperature sensors. Its ability to operate from a supply voltage as low as 2.7V and its rail-to-rail performance ensure accurate amplification of small signals in energy-efficient designs, such as wearable devices or IoT sensors.
High Accuracy Instrumentation: The LTC1152 is ideal for high-accuracy instrumentation applications, such as precision multimeters or laboratory equipment. Its zero-drift technology and rail-to-rail operation ensure minimal error and maximum signal fidelity, making it a reliable choice for applications demanding the highest levels of precision and stability.
Popular LTC1152 Products comparison
LTC1152CN8#PBF vs LTC1152CS8#TRPBF
LTC1152CN8#PBF vs LTC1152IN8#PBF
LTC1152CN8#PBF vs LTC1152IS8#PBF
LTC1152CN8#PBF vs LTC1152IS8#TRPBF
LTC1152CS8#PBF vs LTC1152CN8#PBF
LTC1152CS8#PBF vs LTC1152CS8#TRPBF
LTC1152CS8#PBF vs LTC1152IN8#PBF
LTC1152CS8#PBF vs LTC1152IS8#PBF
LTC1152CS8#PBF vs LTC1152IS8#TRPBF
LTC1152CS8#TRPBF vs LTC1152IN8#PBF