MT28EW01GABA1HPC-0SIT

The MT28EW01GABA1HPC-0SIT is a 1Gb (128M x 8) Parallel NOR Flash Memory with burst mode feature and a supply voltage range of 2.7V to 3.6V. It offers high-speed read operations and is commonly used in embedded systems, automotive electronics, and communication devices.

Pinout

(Note: The pin configuration below is a general representation. Refer to the specific datasheet for precise details.)

• CE#: Chip Enable Input
• A0-A22: Address Inputs
• DQ0-DQ7: Data Input/Output
• OMO#: Output Enable
• RP#: Ready/Busy Output
• WEN#: Write Enable Input
• ALE: Address Latch Enable
• CLE: Command Latch Enable
• R/B#: Read/Busy Output
• VCC: Power Supply
• GND: Ground

Circuit Diagram

Include a circuit diagram illustrating the connections and operation of the MT28EW01GABA1HPC-0SIT for a visual representation.

Key Features

• 1Gb Parallel NOR Flash Memory: Offers a large memory capacity for data storage in various applications.
• Supply Voltage Range: Operates within a range of 2.7V to 3.6V, suitable for different power supply configurations.
• Burst Mode Support: Features burst mode for high-speed data transfer and read operations.
• Extended Temperature Range: Designed to withstand a wide temperature range, making it suitable for industrial and automotive applications.
• Multiple Operating Modes: Supports various operating modes to facilitate different data access requirements.

Note: For detailed technical specifications, please refer to the MT28EW01GABA1HPC-0SIT datasheet.

Application

• Embedded Systems: Ideal for use in embedded systems requiring non-volatile memory storage.
• Automotive Electronics: Commonly used in automotive electronics for data storage and firmware programming.
• Communication Devices: Suitable for communication devices needing high-speed data access and storage capabilities.

Functionality

The MT28EW01GABA1HPC-0SIT is a high-capacity Parallel NOR Flash Memory that provides fast and reliable data storage solutions for a wide range of electronic applications.

Usage Guide

• Power Supply: Connect VCC (Pin 10) to the power supply within the specified voltage range (2.7V to 3.6V).
• Data Transfer: Use the Address Inputs (A0-A22) and Data Input/Output (DQ0-DQ7) pins for data transfer operations.
• Operating Modes: Set the appropriate control signals on the Write Enable Input (WEN#) and other control pins for desired operating modes.

Frequently Asked Questions

Q: Is the MT28EW01GABA1HPC-0SIT compatible with 3.3V systems?
A: Yes, the MT28EW01GABA1HPC-0SIT can operate within the 2.7V to 3.6V range, making it compatible with 3.3V systems.