MIC4452YM-TR

MIC4451 and MIC4452 CMOS MOSFET gate drivers are tough, efficient, and easy to use. The MIC4451 is an inverting driver, while the MIC4452 is a non-inverting driver. Both versions are capable of 12 A (peak) output and can drive the largest MOSFETs with an improved safe operating margin. The MIC4451/4452 accepts any logic input from 2.4 V to VS without external speed-up capacitors or resistor networks. Proprietary circuits allow the input to swing negative by as much as 5 V without damaging the part. Additional circuits protect against damage from electrostatic discharge. MIC4451/4452 gate drivers can replace three or more discrete components, reducing PCB area requirements, simplifying product design, and reducing assembly cost. Modern Bipolar/CMOS/DMOS construction guarantees freedom from latch-up. The rail-to-rail swing capability of CMOS/DMOS helps ensure adequate gate voltage to the MOSFET during power up/down sequencing. Since these devices are fabricated on a self-aligned process, they have very low crossover current, run cool, use little power, and are easy to drive.

Key Features

• BiCMOS/DMOS construction
• Latch-up proof: fully isolated process is inherently immune to any latch-up.
• Input will withstand negative swing of up to 5 V
• Matched rise and fall times 25 ns
• Wide operating range 4.5 V to 18 V
• High capacitive load drive 62,000 pF
• Low delay time 30 ns (typical)
• Logic high input for any voltage from 2.4 V to V_S
• Low equivalent input capacitance 7 pF (typical)
• Low supply current 450 µA with logic 1 input
• Low output impedance 1.0 Ω
• Output voltage swings within 25 mV of ground or V_S.