• IR2113S SOIC-16
IR2113S SOIC-16

IR2113S

High-efficiency design enables quiet operation with minimal heat generation (73)

Inventory:3,830

  • 90-day after-sales guarantee
  • 365 Days Quality Guarantee
  • Genuine Product Guarantee
  • 7*24 hours service quarantee

Rapid Quote

Submit your quote request for IR2113S using this form.You can also reach us via email at Email: [email protected], and we will respond within 12 hours.

Overview of IR2113S

The IR2113S is a single MOSFET driver optimized for high-speed and low-voltage operations. It provides excellent performance for analog and digital signal switching, making it an ideal component for various applications in the field of power electronics.

Pinout

The IR2113S pinout refers to the configuration and function of each pin in its 16-SOIC (0.295", 7.50mm Width) package. This package typically includes a diagram showing the layout of the pins when viewed from the top down with pins named sequentially. Each pin on the IR2113S has a specific role such as power supply input, ground connection, or signal interface. The pinout details are crucial for integrating this component into a circuit as they ensure correct connections for optimal device performance. Designers and engineers must refer to the datasheet provided by the manufacturer to get accurate information regarding each pin's function and electrical characteristics.

Features

  • Floating channel designed for bootstrap operation: The IR2113S features a floating channel that is designed for bootstrap operation, allowing it to operate in a wide range of applications.
  • Fully operational to +600 V: This component can operate at voltages up to +600V, making it suitable for high-voltage applications.
  • Fully operational to +500 V version available (IR2110): For lower voltage applications, the IR2110 is a fully operational version of this driver that operates at voltages up to +500V.
  • Tolerant to negative transient voltage: The IR2113S is designed to be tolerant to negative transient voltage, ensuring reliable operation in various environments.
  • dV/dt immune: This component features dV/dt immunity, which helps prevent unwanted switching due to rapid changes in the input signal.
  • Gate drive supply range from 10 to 20 V: The IR2113S can operate with a gate drive supply voltage ranging from 10 to 20V, providing flexibility for various applications.
  • Undervoltage lockout for both channels: This component features undervoltage lockout for both channels, ensuring that the driver remains in a safe state when the input voltage is below a certain threshold.
  • 3.3 V logic compatible: The IR2113S is designed to be compatible with 3.3V logic, making it suitable for use in various digital systems.
  • Separate logic supply range from 3.3 V to 20 V: This component can operate with a separate logic supply voltage ranging from 3.3V to 20V, providing flexibility for various applications.
  • Logic and power ground +/- 5 V offset: The IR2113S features an offset of +/- 5V between the logic and power grounds, ensuring reliable operation in various environments.
  • CMOS Schmitt-triggered inputs with pull-down: This component features CMOS Schmitt-triggered inputs with a pull-down function, which helps prevent unwanted switching due to noise or other external factors.
  • Cycle by cycle edge-triggered shutdown logic: The IR2113S features cycle-by-cycle edge-triggered shutdown logic, ensuring that the driver remains in a safe state when the input signal is not present.

Applications

The IR2113S can be used in various applications such as:

  • PWM motor control systems
  • Power supplies and converters
  • Audio amplifiers and speakers
  • Industrial automation systems
  • Automotive electronics

Advantages and Disadvantages

Advantages:

  • High-speed operation up to 2.5 MHz
  • Fully operational to +600V
  • Tolerant to negative transient voltage
  • dV/dt immune
  • CMOS Schmitt-triggered inputs with pull-down
  • Cycle-by-cycle edge-triggered shutdown logic

Disadvantages:

  • Not suitable for high-frequency applications above 2.5 MHz
  • May not be compatible with all types of logic levels
  • Requires a separate logic supply voltage

Equivalents

The IR2113S is equivalent to other MOSFET drivers such as:

  • STP16NF06L
  • FAN7380
  • IR2104

Frequently Asked Questions

Q: What is the maximum operating frequency of the IR2113S?
A: The maximum operating frequency of the IR2113S is 2.5 MHz.

Q: Can the IR2113S operate at voltages above +600V?
A: No, the IR2113S can only operate at voltages up to +600V.

Q: Is the IR2113S compatible with 5V logic levels?
A: No, the IR2113S is designed for use with 3.3V logic levels and may not be compatible with 5V logic levels.

Q: What is the recommended operating temperature range of the IR2113S?
A: The recommended operating temperature range of the IR2113S is -40°C to +150°C.

IR2113S

Specifications

The followings are basic parameters of the part selected concerning the characteristics of the part and categories it belongs to.

Input Vcc max 20.0 V Input Vcc min 10.0 V
Configuration High-side and low-side Isolation Type Functional levelshift

Warranty & Returns

Warranty, Returns, and Additional Information

  • QA & Return Policy ?

    Parts Quality Guarantee: 365 days

    Returns for refund: within 90 days

    Returns for Exchange: within 90 days

  • Shipping and Package ?

    Shipping:For example, FedEx, JP, UPS, DHL,SAGAWA, or YTC.

    Parts Packaging Guarantee: Featuring 100% ESD anti-static protection, our packaging incorporates high toughness and superior buffering capabilities.

  • Payment ?

    For example, channels like VISA,MasterCard,Western Union,PayPal,MoneyGram,Rakuten Pay and more.

    If you have specific payment channel preferences or requirements, please get in touch with our sales team for assistance.

packageimg

IR2113S

High-efficiency design enables quiet operation with minimal heat generation (73)

Inventory:

3,830