93LC46BT-I/ST

Overview of 93LC46BT-I/ST

The 93LC46BT-I/ST is a 1K-bit serial electrically erasable programmable read-only memory (EEPROM) chip with a 2-wire serial interface optimized for high-speed and low-voltage operations. It provides excellent performance for non-volatile data storage, configuration settings, and industrial controls.

Pinout

The 93LC46BT-I/ST pinout refers to the configuration and function of each pin in its TSSOP-8 package. This package typically includes a diagram showing the layout of the pins when viewed from the top down with pins named sequentially. Each pin on the 93LC46BT-I/ST has a specific role such as power supply input, ground connection, or signal interface. The pinout details are crucial for integrating this component into a circuit as they ensure correct connections for optimal device performance. Designers and engineers must refer to the datasheet provided by the manufacturer to get accurate information regarding each pin's function and electrical characteristics.

Features

• 1K-bit Memory: The 93LC46BT-I/ST features a 1K-bit memory capacity, making it suitable for various applications that require non-volatile data storage.
• Serial Interface: The chip has a 2-wire serial interface that enables efficient communication with microcontrollers and other devices.
• High-Speed Clock Frequency: The 93LC46BT-I/ST operates at a high-speed clock frequency of up to 3MHz, making it suitable for applications that require fast data transfer rates.
• Low-Voltage Operation: The chip can operate at a low voltage range of 2.5V to 5.5V, making it suitable for battery-powered devices and other applications where power consumption is critical.
• 16-Byte Page Write Buffer: The 93LC46BT-I/ST features a 16-byte page write buffer that enables efficient read/write operations and reduces the number of bus cycles required to perform writes.

Applications

• Smart Meters: The 93LC46BT-I/ST is well-suited for smart meter applications where non-volatile data storage and low-power operation are critical.
• Industrial Controls: The chip's high-speed clock frequency, serial interface, and low-voltage operation make it suitable for industrial control applications that require fast data transfer rates and efficient communication.
• Firmware Updates: The 93LC46BT-I/ST can be used to store firmware updates in devices such as automotive systems, medical equipment, and other applications where software updates are critical.
• Configuration Settings: The chip's non-volatile memory makes it suitable for storing configuration settings in devices such as routers, switches, and other network equipment.

Equivalents

For similar functionalities, consider these alternatives to the 93LC46BT-I/ST:

• M24C64-VM6I: The M24C64-VM6I is a 64K-bit serial EEPROM that features a high-speed clock frequency and low-power operation.
• AT24AS02B: The AT24AS02B is a 2K-bit serial EEPROM that features a high-speed clock frequency and low-power operation, making it suitable for applications that require non-volatile data storage.
• ST93LC66BT-I/ST: The ST93LC66BT-I/ST is a 64K-bit serial EEPROM that features a high-speed clock frequency and low-power operation, making it suitable for applications that require large amounts of non-volatile data storage.

Frequently Asked Questions

Q: What is the memory capacity of the 93LC46BT-I/ST?
A: The 93LC46BT-I/ST features a 1K-bit memory capacity.

Q: What is the maximum clock frequency of the 93LC46BT-I/ST?
A: The 93LC46BT-I/ST operates at a high-speed clock frequency of up to 3MHz.

Q: Can the 93LC46BT-I/ST operate at low voltage levels?
A: Yes, the 93LC46BT-I/ST can operate at a low voltage range of 2.5V to 5.5V.

Q: What is the purpose of the serial interface on the 93LC46BT-I/ST?
A: The serial interface enables efficient communication with microcontrollers and other devices, making it suitable for applications that require data transfer rates and communication protocols.