USB5806CT/KD

MPLAB® Connect Configurator, Microchip’s proprietary software utility, provides the ability to program on-chip, One Time Programmable (OTP) ROM for the USB5806C, storing required register settings to ensure the desired start-up configuration at power on. For even more simplicity, the USB5806C can be configured through a series of external low-cost resistor bootstraps, with no OTP programming required. This level of flexibility, combined with firmware control over LED, GPIOs, and port control signal pins, allows for maximum operational flexibility in USB system configurations

Key Features

Six downstream USB3.1 Gen1/2.0 ports
• Integrated Hub Feature Controller (HFC) enabling I/O Bridging and FlexConnect

USB to I2C/SPI/GPIO bridge endpoint support

Reversible upstream and downstream Port 1 roles on command

Integrated Billboard class device for Power Delivery notification support
• PortSplitting - USB downstream port can be split for custom applications using embedded USB3 devices in parallel with USB2.0 devices.
• Battery Charging - USB-IF rev1.2 support on downstream ports (DCP, CDP, SDP) including legacy Apple® iOS, Blackberry®, China Charging and many others
• Port Config Straps - Predefined configuration of port settings – Battery Charging ports, Non-Removable ports, Disabling ports

USB Link Power Management (LPM) support

IETF RFC 4122 compliant 128-bit UUID

Compatible with MSFT Windows 10, 8, 7, XP, Apple OS X 10.4+, and Linux hub drivers

Available in 100-pin (12mm x 12mm) VQFN RoHS compliant package

Industrial grade temperature support (−40°C to +85°C)