UCC27200ADRMT

The UCC2720xA family of high-frequency N-channel MOSFET drivers include a 120-V bootstrap diode and high-side/low-side driver with independent inputs for maximum control flexibility. This allows for N-channel MOSFET control in half-bridge, full-bridge, two-switch forward and active clamp forward converters. The low-side and the high-side gate drivers are independently controlled and matched to 1-ns between the turn-on and turn-off of each other. The UCC2720xA are based on the popular UCC27200/1 drivers, but offer some enhancements. In order to improve performance in noisy power supply environments the UCC2720xA has an enhanced ESD input structure and also has the ability to withstand a maximum of –18 V on its HS pin.

An on-chip bootstrap diode eliminates the external discrete diodes. Under-voltage lockout is provided for both the high-side and the low-side drivers forcing the outputs low if the drive voltage is below the specified threshold.

Two versions of the UCC27200A are offered. The UCC27200A has high-noise immune CMOS input thresholds while the UCC27201A has TTL-compatible thresholds.

Both devices are offered in an 8-pin SOIC (D), PowerPad SOIC-8 (DDA), SON-8 (DRM) package, a 9-pin SON-9 (DRC) package and a 10-pin SON-10 (DPR) package.

Key Features

• Drives Two N-Channel MOSFETs in High-Side
  and Low-Side Configuration
• Negative Voltage Handling on HS (–18V)
• Maximum Boot Voltage 120 V
• Maximum VDD Voltage 20 V
• On-Chip 0.65-V VF, 0.6-Ω RD Bootstrap Diode
• Greater than 1 MHz of Operation
• 20-ns Propagation Delay Times
• 3-A Sink, 3-A Source Output Currents
• 8-ns Rise/7-ns Fall Time with 1000-pF Load
• 1-ns Delay Matching
• Undervoltage Lockout for High-Side and Low-Side
  Driver
• Offered in 8-Pin SOIC (D), PowerPAD™ SOIC-8
  (DDA), SON-8 (DRM), SON-9 (DRC) and SON-10
  (DPR) Packages
• Specified from –40°C to 140°C