• TLE2082ACP 8-PDIP
TLE2082ACP 8-PDIP

TLE2082ACP

Op Amp Dual Wideband Amplifier ±19V 8-Pin PDIP Tube

Inventory:8,489

  • 90-day after-sales guarantee
  • 365 Days Quality Guarantee
  • Genuine Product Guarantee
  • 7*24 hours service quarantee
  • Part Number : TLE2082ACP

  • Package/Case : 8-PDIP

  • Brands : TI

  • Components Categories : AmplifiersInstrumentation, OP Amps, Buffer Amps

  • Datesheet : TLE2082ACP DataSheet (PDF)

Quick Inquiry

Please submit RFQ for TLE2082ACP or email to us: Email: [email protected], we will contact you in 12 hours.

Overview of TLE2082ACP

The TLE208x series of JFET-input operational amplifiers more than double the bandwidth and triple the slew rate of the TL07x and TL08x families of BiFET operational amplifiers. The TLE208x also have wider supply-voltage rails, increasing the dynamic-signal range for BiFET circuits to ±19 V. On-chip zener trimming of offset voltage yields precision grades for greater accuracy in dc-coupled applications. The TLE208x are pin-compatible with lower performance BiFET operational amplifiers for ease in improving performance in existing designs.

BiFET operational amplifiers offer the inherently higher input impedance of the JFET-input transistors, without sacrificing the output drive associated with bipolar amplifiers. This makes these amplifiers better suited for interfacing with high-impedance sensors or very low level ac signals. They also feature inherently better ac response than bipolar or CMOS devices having comparable power consumption.

Because BiFET operational amplifiers are designed for use with dual power supplies, care must be taken to observe common-mode input-voltage limits and output voltage swing when operating from a single supply. DC biasing of the input signal is required and loads should be terminated to a virtual ground node at mid-supply. Texas Instruments TLE2426 integrated virtual ground generator is useful when operating BiFET amplifiers from single supplies.

The TLE208x are fully specified at ±15 V and ±5 V. For operation in low-voltage and/or single-supply systems, Texas Instruments LinCMOS™ families of operational amplifiers (TLC- and TLV-prefix) are recommended. When moving from BiFET to CMOS amplifiers, particular attention should be paid to slew rate and bandwidth requirements and output loading.

For BiFET circuits requiring low noise and/or tighter dc precision, the TLE207x offer the same ac response as the TLE208x with more stringent dc and noise specifications.

Key Features

  • Direct Upgrades to TL05x, TL07x, and TL08x BiFET Operational Amplifiers
  • Greater Than 2× Bandwidth (10 MHz) and 3× Slew Rate (45 V/us) Than TL08x
  • On-Chip Offset Voltage Trimming for Improved DC Performance
  • Wider Supply Rails Increase Dynamic Signal Range to ±19 V

LinCMOS is a trademark of Texas Instruments.

Specifications

The followings are basic parameters of the part selected concerning the characteristics of the part and categories it belongs to.

Source Content uid TLE2082ACP Pbfree Code Yes
Rohs Code Yes Part Life Cycle Code Active
Ihs Manufacturer TEXAS INSTRUMENTS INC Part Package Code DIP
Package Description DIP, DIP8,.3 Pin Count 8
Reach Compliance Code compliant ECCN Code EAR99
HTS Code 8542.33.00.01 Samacsys Manufacturer Texas Instruments
Amplifier Type OPERATIONAL AMPLIFIER Architecture VOLTAGE-FEEDBACK
Average Bias Current-Max (IIB) 0.005 µA Bias Current-Max (IIB) @25C 0.000175 µA
Common-mode Reject Ratio-Min 80 dB Common-mode Reject Ratio-Nom 98 dB
Frequency Compensation YES Input Offset Current-Max (IIO) 0.00035 µA
Input Offset Voltage-Max 3000 µV JESD-30 Code R-PDIP-T8
JESD-609 Code e4 Length 9.81 mm
Low-Bias YES Low-Offset NO
Micropower NO Neg Supply Voltage Limit-Max -19 V
Neg Supply Voltage-Nom (Vsup) -5 V Number of Functions 2
Number of Terminals 8 Operating Temperature-Max 70 °C
Operating Temperature-Min Package Body Material PLASTIC/EPOXY
Package Code DIP Package Equivalence Code DIP8,.3
Package Shape RECTANGULAR Package Style IN-LINE
Packing Method TUBE Power NO
Power Supplies +-5/+-15 V Programmable Power NO
Qualification Status Not Qualified Seated Height-Max 5.08 mm
Slew Rate-Min 25 V/us Slew Rate-Nom 40 V/us
Supply Current-Max 3.9 mA Supply Voltage Limit-Max 19 V
Supply Voltage-Nom (Vsup) 5 V Surface Mount NO
Technology BIFET Temperature Grade COMMERCIAL
Terminal Finish NICKEL PALLADIUM GOLD Terminal Form THROUGH-HOLE
Terminal Pitch 2.54 mm Terminal Position DUAL
Unity Gain BW-Nom 10000 Voltage Gain-Min 8912.5
Wideband NO Width 7.62 mm

Warranty & Returns

Warranty, Returns, and Additional Information

  • QA & Return Policy

    Parts Quality Guarantee: 365 days

    Returns for refund: within 90 days

    Returns for Exchange: within 90 days

  • Shipping and Package

    Shipping:For example, FedEx, SF, UPS, or DHL.UPS, or DHL.

    Parts Packaging Guarantee: Featuring 100% ESD anti-static protection, our packaging incorporates high toughness and superior buffering capabilities.

  • Payment

    For example, channels like VISA, MasterCard, UnionPay, Western Union, PayPal, and more.

    If you have specific payment channel preferences or requirements, please get in touch with our sales team for assistance.