O9039A385IZWSTQ1

Power Management Specialized - PMIC Automotive 3.15V to 5.5V, 7 Buck & 6 LDO Power Management IC (PMIC) for ARM Cortex A15 Processors 169-NFBGA -40 to 85

Key Features

• Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Temperature Grade 3: –40°C to 85°C
    • ESD Classification:
      • HBM Level 2
      • CDM Level C3
    • Latch-Up Classification:
      • Level IIB for I²C and SPI Terminals
      • Level IIA for all other Terminals
• Seven Step-Down Switched-Mode Power Supply (SMPS) Regulators:
  • One 0.7 to 1.65 V at 6 A (10-mV Steps)
    • Dual-Phase Configuration With Digital Voltage Scaling (DVS) Control
  • One 0.7 to 1.65 V at 4 A (10-mV Steps)
    • Dual-Phase Configuration With DVS Control
  • One 0.7 to 3.3 V at 3 A (10 or 20-mV Steps)
    • Single-Phase Configuration
    • This Regulator can be Combined With the 6 A Resulting in a 9 A Triple-Phase Regulator (DVS Controlled)
  • Two 0.7 to 3.3 V at 2 A (10 or 20-mV Steps)
    • Single-Phase Configuration
    • One Regulator With DVS Control, Which can also be Configured as a 3-A Regulator
  • Two 0.7 to 3.3 V at 1 A (10 or 20-mV Steps)
    • Single-Phase Configuration
    • One Regulator With DVS Control
  • Output Current Measurement in All Except 1-A SMPS Regulators
  • Differential Remote Sensing (Output and Ground) in Dual-Phase and Triple-Phase Regulators
  • Hardware and Software-Controlled ECO-mode™ up to 5 mA with 15-µA Quiescent Current
  • Short-Circuit Protection
  • Powergood Indication (Voltage and Overcurrent Indication)
  • Internal Soft-Start for In-Rush Current Limitation
  • Ability to synchronize SMPS to External Clock or Internal Fallback Clock With Phase Synchronization
• Eleven General-Purpose Low Dropout (LDO) Regulators (50-mV Steps):
  • Four 0.9 to 3.3 V at 300 mA With Preregulated Supply
  • Four 0.9 to 3.3 V at 200 mA With Preregulated Supply
  • One 0.9 to 3.3 V at 50 mA With Preregulated Supply
  • One 100-mA USB LDO
  • One Low-Noise LDO 0.9 to 3.3 V up to 100 mA (Low Noise Performance up to 50 mA)
  • Two Additional LDOs for PMU Internal Use
  • Short-Circuit Protection
• Clock Management 16-MHz Crystal Oscillator and 32-kHz RC Oscillator
  • One Buffered 32-kHz Output
• Real-Time Clock (RTC) With Alarm Wake-Up Mechanism
• 12-bit Sigma-Delta General-Purpose Analog-to-Digital-Converter (GPADC) With Three External Input Channels and Six Internal Channels for Self Monitoring
• Thermal Monitoring
  • High Temperature Warning
  • Thermal Shutdown
• Control
  • Configurable Power-Up and Power-Down Sequences (One-Time Programmable [OTP])
  • Configurable Sequences Between the SLEEP and ACTIVE States (OTP Programmable)
  • One Dedicated Digital Output Signal (REGEN) that can be Included in the Start-up Sequence
  • Three Digital Output Signals MUXed With GPIO that can be Included in the Start-up Sequence
  • Selectable Control Interface
    • One Serial Peripheral Interface (SPI) for Resource Configurations and DVS Control
    • Two I²C Interfaces. One Dedicated for DVS Control, and a General Purpose I²C Interface for Resource Configuration and DVS Control
• Undervoltage Lockout
• System Voltage Range from 3.135 to 5.25 V
• Package Options
  • 12-mm × 12-mm 169-pin nFBGA with 0,8-mm Ball Pitch