MX29GL128FLT2I-70G

FLASH - NOR Memory IC 128Mbit Parallel 70 ns 56-TSOP

Key Features

• 262,144x 8 only
• Fast access time: 55/70/90/120ns
• Low power consumption
• - 30mA maximum active current(5MHz)
• - 1uA typical standby current
• Programming and erasing voltage 5V ± 10%
• Command register architecture
• - Byte Programming (7us typical)
• - Sector Erase (16K-Byte x1, 8K-Byte x 2, 32K-Byte x1, and 64K-Byte x 3)
• Auto Erase (chip & sector) and Auto Program
• - Automatically erase any combination of sectors or the whole chip with Erase Suspend capability.
• - Automatically programs and verifies data at specified address
• Erase Suspend/Erase Resume
• - Suspends an erase operation to read data from, or program data to, a sector that is not being erased, then resumes the erase operation.
• Status Reply
• - Data polling & Toggle bit for detection of program and erase cycle completion.
• Sector protection
• - Hardware method to disable any combination of sectors from program or erase operations
• - Sector protect/unprotect for 5V only system or 5V/12V system
• 100,000 minimum erase/program cycles
• Latch-up protected to 100mA from -1 to VCC+1V
• Boot Code Sector Architecture
• - T = Top Boot Sector
• - B = Bottom Boot Sector
• Hardware RESET pin(only for 29F002T/B)
• - Resets internal state machine to read mode
• Low VCC write inhibit is equal to or less than 3.2V
• Package type:
• - 32-pin PDIP
• - 32-pin PLCC
• - 32-pin TSOP (Type 1)
• 20 years data retention