MC908AZ60ACFU

The MC908AZ60ACFU is an 8-bit MCU based on the HCS08 (High-Performance Compact 8-bit) core architecture. It features a rich set of peripherals, including analog and digital functions, making it suitable for a wide range of applications.

Pinout

(Note: The pin configuration below is a general representation. Refer to the specific datasheet for precise details.)

• VDD: Power Supply
• VSS: Ground
• DQ0-DQ31: Data Input/Output Pins
• CLK: Clock Input
• CS: Chip Select
• RAS: Row Address Strobe
• CAS: Column Address Strobe
• WE: Write Enable

Circuit Diagram

Include a circuit diagram illustrating the connections and operation of the MC908AZ60ACFU for a visual representation.

Key Features

• HCS08 Core: Based on the HCS08 core architecture, providing high performance and efficiency.
• Clock Speed: Maximum operating frequency of 60 MHz.
• Flash Memory: Up to 60 KB of on-chip flash memory for program storage.
• RAM: Up to 4 KB of on-chip RAM for data storage.
• Analog-to-Digital Converter (ADC): For analog signal processing, suitable for sensor applications.
• Timers and PWM: Including timers and pulse-width modulation (PWM) modules for timing and control applications.
• Communication Interfaces: Supports various communication interfaces, including SPI and I2C, for connectivity.
• Low Power Consumption: Designed for low power consumption, suitable for battery-operated devices.

Note: For detailed technical specifications, refer to the MC908AZ60ACFU datasheet.

Application

• Embedded Systems: Suitable for various embedded systems, such as industrial control systems, consumer electronics, and automotive applications.
• Sensor Applications: Suitable for sensor interfacing and data acquisition applications.
• Control Systems: Can be used in control systems for motor control, lighting control, and other automation applications.
• Communication Systems: Suitable for use in communication systems, such as IoT devices and networking equipment.

Functionality

The MC908AZ60ACFU provides high-performance processing capabilities and a rich set of peripherals, making it versatile for a wide range of applications. Its low power consumption and compact form factor make it suitable for use in various embedded systems.

Usage Guide

• Power Supply: Connect VDD (Power Supply Pin) to the appropriate power supply voltage and VSS (Ground Pin) to ground.
• I/O Configuration: Configure the MCU's I/O pins for input or output functions as required by your application.
• Programming: Program the MCU's flash memory with the desired firmware using a compatible programming tool.

Frequently Asked Questions

Q: What is the operating voltage range of the MC908AZ60ACFU?

A: The MC908AZ60ACFU operates within a voltage range of 2.7V to 5.5V.

Q: Can the MC908AZ60ACFU be programmed in-circuit?

A: Yes, the MC908AZ60ACFU supports in-circuit programming using standard programming tools and interfaces.

Q: What development tools are available for programming the MC908AZ60ACFU?

A: NXP provides a range of development tools, including software development environments and hardware programmers, for programming and debugging the MCU.