ATMEGA64-16AU

The ATMEGA64-16AU is a high-performance 8-bit microcontroller based on the AVR RISC architecture. It offers 64KB of in-system programmable flash memory, 4KB of SRAM, and 2KB of EEPROM, making it suitable for a wide range of applications.

Pinout

(Note: The pin configuration below is a general representation. Refer to the specific datasheet for precise details.)

• VCC: Positive power supply
• GND: Ground
• RESET: Reset pin
• XTAL1: Input for external crystal oscillator
• XTAL2: Output for external crystal oscillator
• ADC0-ADC7: Analog to digital converter input pins
• AREF: Analog reference voltage
• RXD0/TXD0: Serial communication pins
• INT0/INT1: External interrupt pins
• SCK, MISO, MOSI: SPI communication pins
• SCL, SDA: I2C communication pins

Circuit Diagram

Include a circuit diagram illustrating the connections and operation of the ATMEGA64-16AU microcontroller for a visual representation.

Key Features

• High-Performance AVR Microcontroller: Based on the efficient AVR RISC architecture, offering high performance and low power consumption.
• 64KB Flash Memory: Provides ample space for program storage and in-system programmability.
• Wide Operating Voltage Range: Operates from 2.7V to 5.5V, making it versatile for various applications.
• Multiple Communication Interfaces: Supports UART, SPI, and I2C communication for connectivity.
• Analog-to-Digital Converter: Integrated ADC for analog sensor interfacing and data acquisition.

Note: For detailed technical specifications, please refer to the ATMEGA64-16AU datasheet.

Application

• Embedded Systems: Ideal for embedded systems development, automation, and control applications.
• IoT Devices: Suitable for IoT device prototyping and development with its versatile features.
• Sensor Interfaces: Used in applications requiring analog sensor interfacing and data processing.

Functionality

The ATMEGA64-16AU microcontroller provides powerful processing capabilities with versatile communication interfaces and memory options, making it a reliable choice for diverse applications.

Usage Guide

• Power Supply: Connect VCC (Pin 10) to the positive power supply and GND (Pin 11) to ground.
• Crystal Oscillator: Connect an external crystal between XTAL1 (Pin 14) and XTAL2 (Pin 15) for clock operation.
• Communication Setup: Use the appropriate pins for UART, SPI, or I2C communication as per the application requirements.

Frequently Asked Questions

Q: Can the ATMEGA64-16AU be programmed using the Arduino IDE?
A: Yes, the ATMEGA64-16AU can be programmed using the Arduino IDE with additional configuration for the AVR architecture.

Q: What is the maximum clock speed supported by the ATMEGA64-16AU?
A: The ATMEGA64-16AU supports a maximum clock speed of 16MHz under specified conditions.